Selective Electronic Detonator for Oil & Gas Operations
It is designed for perforating applications in both conventional and unconventional oilfield operations. Its compact size makes it highly versatile, as it can be used in side-ported guns from 2 ¾” in diameter or in any modular gun system.
The VENG SDES system allows each detonator to be individually selected to initiate the ETACORD-80 RDX.
Developed as a robust and reliable solution, it fully complies with API RP-67 recommended practices, classified within Group 2 electronic detonators.
EDS VENG is based on API-RP67 standard—
- The control unit allows the operator to manage up to 16 detonators.
- Designed to operate with standard wireline lengths from 3 to 8 km.
- Detonators can be connected in a daisy-chain configuration and individually selected for firing.
- The string can be verified through the Testing Unit without the ability to initiate detonations.
MECHANICAL AND CHEMICAL PLASTIC HOUSING
55 mm in length with integrated holes for detonating cord passage.
WEIGHT15 g
PRIMARY CHARGE
150 mg Lead Azide + 600 mg RDX
DESIGNED FOR
2 ¼” intermediates with side port
SAFETY
EMI/EMC
RS: 100 V/m between 540 kHz and 12 GHz according to MIL-STD-461, tested at LACEM-CONAE
RS: 100 V/m between 80 MHz and 6 GHz according to IEC-61000-4-3, tested at CETEM-UNSAM
ESD: HBM ±25 kV; 150 pF; 330 Ohm according to IEC-61000-4-2
SUPPORTS DIRECT CONNECTION TO 220VAC WITHOUT DETONATION
MAXIMUM TEMPERATURE
150°C for 1 hour
COMPLIANCE
UNECE TEST SERIES 4(B)
Drop Test 12m
UNECE Test Series 3(d)
Explosive substances insensitivity.
API RP-67 Pull Test
Verified tensile strength of 31N between case and lead wires.
OPERATING CHARACTERISTICS
OPERATING VOLTAGE
25–43 V
OPERATING TEMPERATURE
-10 to 125 °C
